Spray Booth GTSB-300 Pre-Order

Description

Spray Booth

–Wall panel: sandwich style, δ=50mm, polystyrene. rock wool is optional.
–Basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional.
–Door: 3 pcs of front door without aluminum side cover.
1pcs of emergency door with pressure lock.
–Ramp: 2 pcs of vein board.-two 4.0kw intake fan, one 5.5kw Exhaust fan
–4m straight exhaust ducts, one 90° bend, and one 60° bend.,4m straight chimney and 2 small bends.
–Spraying/baking transition damper, automatically electric controlled.
–Heat exchanger: stainless steel. Riello G20 burner.
–Roof filter: 4 pcs of filter, mounted above support frame, which is made of steel and powder coated.
–2 pcs of floor filter and 1 pcs of outlet filter.–Upper light: 10 sets, 4*40w per set.
–Control box: components made in china, overload, overheat,
phase-lacking protection, straight driven motor.
–Automatically stop when preset time is up.–Constant temperature spraying.

Spray Booth – Technical Specifications
External size(m) 7.0×5.3×3.5
Internal size(m) 6.9×3.9×2.7
Door width (m) 3.0
Door height (m) 2.66
Air flow (m3/h) 24000
Inside on-load air speed(m/s) 0.25-0.35
Power (kw) 13.5
Vehicle suited Saloon car

Specifications

Semi-Down Draft: Air enter booth cabin through top front filtered plenum, and exhausted from the rear centered exhaust plenum.